Hammer drill 1200W - 6 acc. POWX11721
Unboxing
Description
The Powerplus 1200W hammer drill has plenty of power with up to 4 350 strokes per minute. With its four different functions, you can drill, hammer, hammer drill and chisel. Whether you need to work in concrete, wood or masonry, the hammer drill gets the job done effortlessly.
With the included depth stop, you can choose a precise drilling depth and drill several holes of equal depth in a row, without wasting precious time. The dust cap limits the amount of dust from flying in the air.
The hammer drill is equipped with an ergonomic D-shaped grip, an anti-vibration system and an auxiliary grip, that enable you to work comfortably and safely.
On top of that, a BMC, an SDS- plus type pointed and flat chisel, and a chuck with an SDS-plus type adapter are included.
What is included?
- 1x hammer drill
- 1x auxiliary handle (mounted)
- 1x chisel - SDS plus type - flat - 22x250mm
- 1x chisel - SDS plus type - pointed - 250mm
- 1x chuck - 13mm
- 1x chuck key
- 1x depth stop
- 1x drill bit - SDS plus type - Ø 10x150mm
- 1x drill bit - SDS plus type - Ø 12x150mm
- 1x drill bit - SDS plus type - Ø 8x150mm
- 1x dust cap
- 1x grease tube
- 1x spanner
- 1x storage case
- 1x manual
Technical specifications
Box content | |
|---|---|
| Manual included | |
| Chisel included | 2 |
| Auxiliary handle included | |
| key chuck with SDS adapter included | |
| Number of Flat Chisel included | 1 # |
| Number of Pointed Chisel included | 1 # |
| Dust cap included | |
| Grease pot included | |
| Number of Spanner tools included | 1 # |
| Depth stop included | |
| Chuck key included | |
| Grease tube included | |
| SDS-Bitholder included | |
| Number of Drill bits included | 3 |
Tool | |
|---|---|
| Rated Voltage AC min (Un) |
230 V
|
| Rated Voltage AC max (Un) |
240 V
|
| Rated frequency (fn) max |
50 Hz
|
| Rated power (Pn) min |
1200 W
|
| Rated power (Pn) max |
1200 W
|
| Sound Power Level (LwA) |
100 dB(A)
|
| Max. Drill bit diameter |
28 mm
|
| Power cable length |
3 m
|
| Max. Torque |
60 Nm
|
| Drill capacity stone |
28 mm
|
| Keyless chuck | |
| Auto locking chuck |
Not applicable
|
| Key chuck | |
| Electronic speed control | |
| Vibration reduction system |
Single
|
| Overload protection | |
| Adjustable torque | |
| Impact energy (Joule) |
5 J
|
| Number of speed settings |
1
|
| Storage type |
BMC (blow molded case)
|
| Soft grip | |
| Swivel ball cable restraint | |
| Soft start motor | |
| Direction of rotation |
[
"Right"
]
|
| Drill function | |
| Adjustable speed | |
| Full metal body |
Not applicable
|
| Quick release - toolless disassembly | |
| Power indicator | |
| Rubber power cable | |
| Hammerdrill function | |
| Rotation speed (n) max |
870 min-1
|
| Drill capacity steel |
13 mm
|
| Drill capacity wood |
40 mm
|
| Impact rate max |
4300 strks/min
|
| Drill capacity concrete |
30 mm
|
| Impact rate min |
0 strks/min
|
| Chisel function | |
| General warranty |
36 MO.
|
Package
| Package | Qty | Length | Width | Height | Weight | Net weight |
|---|---|---|---|---|---|---|
| ST | 1 | 41 cm | 12 cm | 33.5 cm | 7.88 kg | 7.88 kg |
| IN | 3 | 38 cm | 35 cm | 43 cm | 24.54 kg | 24.54 kg |
| OUT | 3 | 38 cm | 35 cm | 43 cm | 24.54 kg | 24.54 kg |
| PAL | 72 | 0 cm | 0 cm | 0 cm | 567.36 kg | 0 kg |