Wallpaper steamer 2000W POWX3410

If you’re tired of your old wallpaper, this Powerplus wallpaper stripper helps you get rid of it in no time. The tool generates steam

What can you do with this wallpaper steamer?

Stripping wallpaper doesn’t have to be a time consuming or excruciatingly long job. This 2000 W wallpaper stripper loosens the wallpaper with steam, after which it comes off easily. Thanks to its 4,5 L water tank, it has an average usage time of 90 min.

Its strong points:

Large water reservoir: With a full tank of no less than 4,5 L, you can work continuously up to 90 min.

Freedom of movement: The 2 m steam hose gives you plenty of mobility, allowing you to use this wallpaper steamer on tall walls as well.

Safety valve: The safety valve prevents excessive pressure to protect both you and the tool.

Tips & Tricks:

• Remove all furniture from the area or move them out of the way and cover them with a tarp. Also protect the floor with a tarp and remove frames, nails and hooks from the walls. Windows and doors are best kept open to prevent the room from fogging up due to the steam.
• To have the steam better penetrate the paper, you can use a cutter knife to make small cuts in the paper. Make sure not to cut too deep though, to prevent damaging the wall.
• Hot water could leak from the steam plate. Always be careful and place the plate down into a bucket or drain tray.

Its key technical specifications:

• Rated power: 2000 W
• Steam plate width: 190 mm
• Steam plate length: 280 mm
• Tank capacity: 4,5 L
• Work time: 90 min
• Hose diameter: 23 mm
• Steam hose length: 3,5 m
• Power cable length: 2 m

What is included?

• 1x wallpaper steamer
• 1x steam plate
• 1x steam hose
• 1x power cord
• 1x manual